With the summer months approaching, people get more conscious about the proper functioning of their air conditioning system. An air conditioning system consists of many components, and all these components must be working at their optimum capacity for the proper functioning of your AC.

To ensure that your AC can provide you with uninterrupted cooling during the hot summer months, you need to contact an air conditioner repair Jacksonville. However, before you do that, you can check a few things that can help identify the issues with your air conditioning system.

Diagnosing these issues beforehand will eliminate costly repair by a professional. You will also save a lot of money, time, and most importantly, enjoy an interrupted service.

1. Check whether there is electrical power.

This may seem like a no-brainer. However, many people call air conditioner repair, Jacksonville, only to find out that there was no electric supply to the air conditioning system.

Check the fuse box and also check the circuit breaker switch. If the circuit breaker switch is in the off position, turn it on. If the switch is in the correct position, you can turn it off and on again to reboot it.

Sometimes your air conditioner may not receive electricity supply due to damaged wiring. In such a case, you can replace the wiring of your cooling system, and it will resume its normal functioning.

2. Check your thermostat setting.

Before you call an air conditioner repair, Jacksonville, it is essential to check the thermostat settings. As soon as you turn on the air conditioner, the thermostats fan should turn on.

If you can’t hear the humming sound, check whether the thermostat is in on position. Also, check the temperature setting on your machine. The temperature in the thermostat should be lower than the room temperature for effective cooling.

3. Check your air filter.

Before calling a professional, it is essential to check your air filters.

A blockage in the air filter can prevent the cool air from flowing through ducts and vents.

This can cause your system to overwork to produce the desired temperature in your room. A blocked air filter causes unnecessary strain on your system and may eventually lead to more severe component failure. Dirty filters can also cause health issues and need to be replaced at the earliest.

4. Check for blockage in the AC drain.

Many air conditioner systems come with a water safety switch. If the condensed water is leaking from the evaporator coil, the switch will cut off the power.

It prevents the internal parts as well as your floor and ceiling from water damage. If you find your condensate pan overflowing, the possible reason could be a blockage on your AC drain. Clean your condensate pan and remove any blockage in the drain, and your system should start working.

5. Check for a blockage in the outdoor unit.

Your outdoor condenser unit is the most susceptible to dirt, dust, and debris. If the outdoor unit is located near a tree, dry leaves may find their way into the system.

It can cause a blockage and prevent your condenser unit from working at its best capacity. Hence, before calling air conditioner repair, Jacksonville, check for any blockage in the outdoor unit.

6. Check whether the condenser unit is overheated.

If you are not getting the desired cooling results from your air conditioner, it is essential to check the location of your outdoor unit. During the hot summer months, the sunrays can cause overheating of your condenser unit.

It can cause your system to overwork to maintain the temperature. This causes a strain on your system and can cause significant problems in the future. If your outdoor unit is at a location that receives direct sunlight, consider building a shade over it before calling a professional.

These are a few essential things that you must check before calling air conditioner repair, Jacksonville. These factors will help you determine whether you need the repair service at all.